The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Air tools  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Dave Arens
Date: Tue Jan 08 22:31:02 2002
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Epaul, 

>     I am intrigued by your idea. What cleaning solution are you using?
>     When I think "air powered blow gun" what comes to mind is the hand
>     held power sprayer (like the coin-op car wash wand, only about 6"
>     long). Is that what you are referring to? 

    It really depends on what I'm trying to clean. I've used alcohol,
    acetone, alcohol-water-soap & water-soap mixtures. They've all worked
    well. 

    Actually the 1st sprayer I made was from a regular air blow gun, the
    type usually seen in garages & gas stations. They're basically a push
    button valve with a short length of 1/4" copper tube attached. I
    drilled a small hole in the 1/4" tube & inserted a 1/16" tube with
    the open end pointing down stream. The other end of the 1/16" tube
    was attached to a plastic hose that's put in the liquid to be
    sprayed. When the button is pushed, the air rushing by the 1/16" tube
    causes a venturi effect & draws the liquid from supply. This same
    principle is used in all siphon feed spray guns, perfume atomizers &
    garden hose attachments for spraying fertilizers & insecticides. 

>     I suppose an air brush wouldn't have enough pressure to do any
>     good, but what about the $10 sand-blaster from Harbour Freight
>     (about the same size as an air-brush)?

    It all depends on what you're trying to do with it. how large the
    orifice is & how much air pressure you apply. I think most steamers
    operate around 70 psi. With an air compressor & regulator, you can
    adjust the pressure to anything between a few psi & the max the
    compressor is capable of, usually around 125 psi. 

Dave

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project