The Gem and Jewelry World's foremost Resource on The Internet.
[Orchid] Motor Shaft Adapter  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: David Luck
Date: Fri Jan 04 22:21:50 2002
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Everyone, I recently purchased a used Handler dust collector
    cabinet with a Baldor polishing lathe permanently bolted on top
    under the dust hoods.  The Baldor motor has the 3/8 inch quick
    change tapered shafts.  This dust collector has tremendous suction
    and will make my finishing area a lot cleaner and safer. 

    Here is my problem.  I do a great deal of pre-finish sanding using a
    3 inch sanding drum that uses cut strips of abrasive paper.  At
    present I only have dust masks to protect me from the dust this drum
    sander throws off.  This sanding drum will only mount on to an 1/2
    inch straight motor shaft.  I would like to use this sanding drum on
    the Baldor polishing lathe with the quick change tapered shafts.  I
    already have most of the Baldor spindles (Baldor calls them chucks)
    that are used to mount accessories on to the  Baldor lathe.  You can
    see these spindles on page 380 of the Rio Grande 2001 tool catalog. 

    Where can I buy or have made a adapter spindle that will accept the
    sanding drum?  It would have to be a 3/8 inch taper on the inside
    and an1/2 inch straight shaft on the outside.  Any ideas? Thank you.  
    David Luck

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project