[Jewelry making - Article 00137] - Re: [Orchid] Cleaning rollers of rolling mill

[J Morley]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>             Wear Rubber gloves and a mask Spray with Brake Parts
>     Cleaner (Auto Parts Store) let it soak a while like 5 to 10 minutes
>     and wipe it clean then spray with WD40 (also Auto Parts Store). Who
>     ever sold you the mill did not do a good job and I would check the
>     mill thoroughly as many a times the heavy grease just covers up
>     defects. We inspect all our mills and we need to remove the grease
>     and also check all the bolts and parts. 

    Keneth, Is there another lubricant besides WD-40 to use on my mills?I
    dislike the smell of it and don't care to have the oder in my stores
    or studio. J Morley Coyote Ridge Studio 




____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________