========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
It seems to me that to discover what is contaminated, you may want to
do a series of tests to isolate the problem. Do tests of all
different combinations, varying only one element each time. For
instance, try the same flux and solder on a sheet of silver from a
different source. And the same flux and silver you've been using, but
a different solder. If you use all the suggestions from this forum at
the same time, you'll probably solve the problem, but never figure out
the cause so that you can avoid it in the
future. Alana Clearlake, Emeryville, CA
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
