========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
carol - i cut an old leather skirt into 6" & 8" disks/circles & use
those for diamond paste. sounds as though you might be using too
large a micron size after a small size & fuzzing up the previous
polish shine. except for a couple of sizes the paste is color coded
but i mark the size on the backs anyway - never know when the 4 extra
cups of tea will kick in & i just want to whizz along without getting
out the syringe to check. the paste i use is water soluble so i can
wipe the surface of the stone clean between spins to check progress.
i have used paste on a felt bullet on the flexshaft - but do it in a
box or you will be amazed for a long time at the power of that small
flexshaft motor to spin bits of paste over extremely long distances.
good luck - ive