[Jewelry making - Article 00402] - Re: [Orchid] tumble finishing

[Teresa Masters]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    John, Stainless steel shot is more costly to purchase, so one day I
    took myself off to metal salvage stores to see what I could find. I
    bought odd packages of small stainless screws, nuts, and similar and
    added them to my round balls. The different angles aid in the debur
    and polish. 

    I will see if my friends are about ready to return to NZ, and send
    along some of the other shapes. Are you using steel or stainless
    steel? Don't say no, it is a small return for the volumes of very
    valuable information you regularly post. Teresa 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________