The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] How to make a good metal ingot?  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: J Morley
Date: Sun Nov 28 17:03:16 1999
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Paul, My ingot mold is a dark machine type steel.# in one oil is
    what would be considered as a light weight oil as opposed to
    motor oil wich is heavy any light weight oil will do.No
    Holes.Occaisonally I will get a void in the gold bar.That is do
    to not pouring in one continuous pour.I find that You need to
    pour as one movement and keep the torch on the metal until it
    has all poured out.By the way you can use your flat ingot mold to
    make square and rectangular stock.You may already be doing this
    but take one half of your mold in your left hand and the other in
    your right.Now put them together as if you were going to clamp it
    together and make a large bar of stock.Look down at the opening
    it is a large rectangle.Now slide the half of the ingot mold that
    is in your right hand twords you while holding the half that is
    in your left hand stationary.The shape will change from a large
    rectangle to a smaller and smaller rectangle finally down to a
    square.The smaller rectangles are good for making ring shanks the
    square shape can be rolled or filed round or cut cross section
    wise for shapes.   Best J Morley Coyote Ridge Studio 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project