[Jewelry making - Article 00017] - Re: [Orchid] Carbide Drill Bits

[James Bergen]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    G'Day to you John, Carbide Drill Bits are readily available at just
    about any Machine Parts Dealer. They are advertised as being solid
    Carbide and are about double in price or more. However, one point in
    your favor, I'm not sure that they are made in the micro sizes that
    Jewelers use.  I happen to use a two-flute end mill for drilling
    Plexiglass and it's still as sharp as when I bought it, about 4 years
    ago! Catalogs arrive all the time with these drill bits prominently
    displayed for sale. Cheers! JB  

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________