[Jewelry making - Article 00063] - [Orchid] about faceting machines

[DURNINGS]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hi, I realize that there isn't much discussion on faceting machines
    here, but I hope someone might be able to help me. I have seen
    pictures in magazines, videos, and other places of faceting machines
    with wires coming off them-it looks like off the mast and possibly the
    other from the stop screw, going to a box. This box is sometimes a
    needle type meter, other times its a series of lights. I am sure it is
    used to be able to visually tell where you stopped for your previous
    cut, so you can reproduce quickly and accurately. I hope someone can
    tell me how this is done. I have researched this many different ways
    with no answer. Thanks, Larry Durnings Rings & Things DURNINGS AT aol.com 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________