========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
Eric, I assume you are referring to the Greek Key design...made
a ring and a bracelet recently for a customer..went something
like this...I drew square wire 2mm for the ring whick was made
into two size 7 small bands ( one could purchase small bands or
wire if you do not have the ability to draw same)... For the key
symbol I drew 1.5mm wire and carefully and with Zen connectedness
simply bent the design by hand with pliers... plot the design so
the ends make a complete size seven circle with a design even all
around...then weld both solid rings on either side...and there
you have it ! The difficult part is bending the design even
each time... practice on scrap metal...
Terry Parresol in central Florida..still hot and already into
the Christmas rushhhh ...
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
