========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
Michael, I've taught myself to weld sizings. Whether or not you
get porosity in the joint seems to be in how fast you can
recognise that the joint has fused. That is, it's all in the heat
of your flame. Too oxidizing (too hot) and you boil the metal and
pump Oxygen into the joint. Too reducing and you take too long to
fuse increasing fire scale and maybe heating too large an area
and slumping the weld. United's #57 Sterling also works with this
technique. Try it, You'll like it. ( After a little practice)
Chuck Hunner, waxman
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
