I have found this to be a most useful tool to use when rebuilding a bezel using a Laser Welder. It is made from a watchmakers screwdriver and is used to deflect the excess energy reflected at a sensitive stone to prevent damage to the stones surface. This view of the finished product shows 1.5mm X 2mm piece of fine silver welded to the blade tip.... (2005) Complete Story
Here iss a nice little tool that makes use of an old setting bur. If you take the bottom teeth off a setting bur and polish the surface, you will have a tool that allows you to get right up next to the wall of a bezel and work on it without harming the metal on the bottom of the piece..... (2004) Complete Story
These pliers notch round prongs easily to a given depth and replace a bur for the job. They are made to suit a specific size prong and one makes similar pliers for different prong shapes, but all based on this idea. One obtains a pair of chain nose pliers either new or from a flea market and converts them into prong notching pliers.... (1994) Complete Story
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
