|
|
| |
| |
| [655] Full Bezel Setting for Cabochon Stones |
One of the most basic designs in stone setting is "Bezel Setting". It is so rudimentary in its concept. It is very pleasing to the eye also in its simplicity. This concept blends with the smooth vertical shape of the stone. There are no sharp corners, only gradual flowing lines to conform to the stone. So now let us delve into this different style of setting. A round bur that is re-shaped to have the same contours of the "Cab" stone will enable you to perform and overcome any difficult bezel setting procedure....
(2005)
 Complete Story |
| Show me more articles from: [Gemz]|[Gerald N. Lewy] |
| Releated Categories: [Stone Setting] |
|
| [416] Gravers |
Gravers are small cutting tools used for stone setting, texturing, de-burring and applying decorative embellishments and traditional hand engraving. Steps required to prepare new gravers include mounting, sizing, shaping, sharpening and proper storage. Gravers are among the most useful tools at a jeweler's bench. Failure to properly prepare and maintain gravers not only presents a hazard, but also affects quality of work, proper technique and time efficiency. Here are some steps for preparing gravers for utilization with hand techniques.... (2004)
Complete Story |
| Show me more articles from: [Visual Communications]|[Mark B. Mann] |
| Releated Categories: [Small Tools]|[Stone Setting] |
|
| [431] Hoover & Strong’s Tru-Seat Setting System |
Hoover & Strong, Inc. in Richmond, VA provides a line of Tru-Seat settings that include solitaire earrings, pendants and solitaire rings in yellow, white and palladium white gold alloys. By using Tru-Seat mountings and the system outlined below, jewelers can reduce material costs, labor and improve quality..... (2004)
Complete Story |
| Show me more articles from: [Visual Communications]|[Mark B. Mann] |
| Releated Categories: [Small Tools]|[Stone Setting] |
|
| [804] Learn How to Set Baguettes! |
Baguette stones have four corners and a rather deep pavilion. Because of this you must handle these stones with special care at all times. You must make sure that all the bearings being cut are totally in line with the long girdles of this shape of stone..... (2005)
Complete Story |
| Show me more articles from: [BWSimon]|[Gerald Lewy] |
| Releated Categories: [Stone Setting] |
|
| [936] Making a Bezel |
Making a bezel for many stones such as an antique cushion garnet can be difficult when the mandrels on hand do not fit. With the miniature stakes the whole process is quick and easy. The side benefit is that they are more precise than only using pliers or unstable jewelry anvils... (2008)
Complete Story |
| Show me more articles from: [Ganoksin]|[William Fretz] |
| Releated Categories: [Fabrication]|[Stone Setting] |
|
|
|
|
|
| |
