If you benefit from what we're doing and want to give something in return, you can make a donation!
The Gem and Jewelry World's foremost Resource
on The Internet. Open to the public, Free of Charge! We are here to build a strong pool of
information for the benefit of Web's jewelers and craftsmen - and those
interested in jewelry and gemstones.
If you know what the chemicals are that you use and what their dangers are you will be less likely to hurt yourself with them. In your "Right to Know" binder your should have a list of the chemicals in your workshop (a chemical inventory), MSDS sheets and chemical profile sheets which tell you important information about the chemical. A chemical profile sheet is theoretically easier to read than a standard MSDS sheet. There are several places on the internet where chemical profiles are available.... (1999) Complete Story
The "General Safety Rules for Tools" article applies here too, as with all power tools. Read the instruction manuals and directions most carefully. Plating and stripping solutions usually contain cyanides, bases or acids which, if mixed together, are used improperly or carelessly or come in contact with a cyanide plating solution can release hydrogen cyanide gas, which was used by the Nazis in the gas chambers and is still used in gas executions in the United States.... (1998) Complete Story
Enameling involves the firing and melting of suitable glasses onto and into metals for decorative effects. It is done at fairly high temperatures, from 1200F (649C) to a high kiln temperature of 1700F (927C) or so.The primary dangers involve dusts, the particle size of the enamel used, the chemical constituents of the enamel (older enamels frequently contain lead and other toxic metal oxides and chemicals), the infrared radiation of the kiln and sundry opportunities to burn oneself. Enamelists in factories have even been killed by scalds from water when molten enamel was dumped into it.... (1999) Complete Story
Jewelers work with compressed gases of all kinds, in torch systems, kilns, casting machines, abrasive blasters, laser welding machines needing argon and more. Many of these gases are flammable and an explosion hazard, acetylene, propane and hydrogen are examples. Oxygen is often used with these gases. Oxygen is a potent fire risk if it comes in contact with oils, greases or flammable materials, even fingerprint grease left in a fitting has caused a fire before.... (1999) Complete Story
Gloves are used to prevent skin contact with a hazard, whether physical (like a razor edge on a piece of metal), or chemical (such as an alkaline solution like you get when mixing casting investment). Use the correct type of gloves for the chemical you are using. Not all gloves hold up to the same things so consult a chart to see which ones are suitable to which chemicals.... (2002) Complete Story
