Jewelry making, Tips from The Jeweler's bench - Jewelry making information center

The Gem and Jewelry World's Foremost Resource on The Internet.


	for in Add Ganoksin Power Search to your website

| More...

The Gem and Jewelry World's foremost Resource on The Internet. Open to the public, Free of Charge!
We are here to build a strong pool of information for the benefit of Web's jewelers and craftsmen - and those interested in jewelry and gemstones.

Back

Articles by Charles Lewton-Brain

Page: Previous 11 12 13 14 15 16 17 18 19 20 Next

[53] Hints on making tubing

Not all sizes and wall thicknesses of tube come seamless from a factory or refiner. Especially when working in gold it is not cost effective or timely to order in a specific tube size, material, or wall thickness. There are many times when you need a piece of tubing, you don't have it, and you can't wait a day or so to order it in or run across town and buy it. In general, it is possible to make the length of tubing you require.... (1997)

Complete Story

Show me more articles from: [Brain Press Publications]|[Charles Lewton-Brain]

Releated Categories:[Tubing]|[Bench Tips & Tricks]

[149] Holding Objects for Photography

If an object will sit by itself on the shooting surface this is not a problem but often it needs to be propped up in some way. Even objects that will sit well on a flat surface sometimes need tilting slightly towards the camera by placing something under their rear side. Holding objects in place for the photograph is usually fairly easy and fast just by placing a.... (1996)

Complete Story

Show me more articles from: [Small Scale Photography]|[Charles Lewton-Brain]

Releated Categories:[Jewelry Photography]

ISBN: 0969851022

[22] Homemade Engravers Ball

There are several methods of obtaining the smooth rotation of a piece of metal necessary for engraving on it. Many North West Coast American Indians use a hard leather pad and hand control to do it. One can install various chucking devices onto a heavy base as well. A standard machined engravers ball can cost $500 and more. This version costs less than $30.00.... (1994)

Complete Story

Show me more articles from: [Cheap Thrills in the Tool Shop]|[Charles Lewton-Brain]

Releated Categories:[Tools]|[Engraving]

ISBN: 096985106

[243] How jewelers approach working with their material?

This diagram shows how jewelers approach working in the field in terms of how they relate to the material. The approaches chosen will 'filter' the results available, that is that what kind of work you do is partly a reflection of the way you approach working with the material. Traditionally much jewelry has been 'cut and bend'. This diagram allows you to examine how you approach working with metal and then perhaps gives you clues about where you might want to experiment so as to push yourself.... (2003)

Complete Story

Show me more articles from: [Brain Press Publications]|[Charles Lewton-Brain]

Releated Categories:[Critical Notes]

[54] How to step-roll wire

One requires a taper on the end of the wire to grip it with when placed through a drawplate for drawing. One may obtain this taper in several ways.... (1999)

Complete Story

Show me more articles from: [Brain Press Publications]|[Charles Lewton-Brain]

Releated Categories:[Bench Tips & Tricks]|[Wire Working]

Page Previous 11 12 13 14 15 16 17 18 19 20 Next

| More...