Welcome to the Ganoksin Project The Gem and Jewelry World's Foremost Resource on The Internet. Open to the public, Free of Charge! We are here to build a strong pool of information for the benefit of Web's jewelers and craftsmen - and those interested in jewelry and gemstones.
  
  The Gem and Jewelry World's Foremost Resource on The Internet.  
 
   for   in     
Add Ganoksin Power Search to your website 		 
| Site Map | Jewelry Making Articles | Orchid Forums & Archives | Members Blogs | Galleries | BenchTube - Jewelry Making Videos |
| The BenchExchange | MetalCalc | Industry Web Sites Guide | Featured Products | Advertising | Contact Us | Link to Us | RSS feeds| More...

 		 
  Tips from The jeweler's bench
The Gem and Jewelry World's foremost Resource on The Internet. Open to the public, Free of Charge!
We are here to build a strong pool of information for the benefit of Web's jewelers and craftsmen - and those interested in jewelry and gemstones.		  
     
 
 
 
 
 

Back
Articles by Charles Lewton-Brain
Page: Previous  21 22 23 24 25 26 27 28 29 30  Next
 
[27] Some Flexible Shaft Tricks
A good selection of burs may be had from your dentist. Dentists often throw out burrs which still have a reasonable life left in them for a jeweller. The same goes for the probes and other tools. Some dentists are nervous about giving tools away.... (1997)
Complete Story

Show me more articles from: [Brain Press Publications]|[Charles Lewton-Brain]
Releated Categories:[Tools]|[Shop Machines]|[Bench Tips & Tricks]

 

[67] Some hints on Pinback Placement
It is customary to place the joint at the right of the back of the pin and the catch on the left for right handed users who… (1990)
Complete Story

Show me more articles from: [Hinges and Hinge-Based Catches for Jewelers and Goldsmiths]|[Charles Lewton-Brain]
Releated Categories:[Hinges & Catches]|[Fabrication]

 

[13] Some Hints on Rendering
These pages contain a list of recommended tools to jewelry rendering, as well as a series of projects that I have used in classes. You could construct your own 'self-study' course using them.... (1998)
Complete Story

Show me more articles from: [Brain Press Publications]|[Charles Lewton-Brain]
Releated Categories:[Jewelry Design]|[Beginner's Corner]

 

[28] Some notes on Dapping tools
Dapping tools are punches with a ball shaped end. As they are used to dome metal discs and making halves of beads they are sometimes called doming punches. They are usually used with a dapping block, a square or rectangular block of steel or wood which has perfect hemispherical indentations in different sizes.... (1997)
Complete Story

Show me more articles from: [Cheap Thrills in the Tool Shop]|[Charles Lewton-Brain]
Releated Categories:[Tools]|[Small Tools]
ISBN: 096985106

 

[74] Some Notes on Depletion Gilding
This is an academic paper, not a technical 'how to' guide. Many of the procedures described are unsafe in practice.... (1990)
Complete Story

Show me more articles from: [Brain Press Publications]|[Charles Lewton-Brain]
Releated Categories:[Depletion Gilding]

 

Page Previous  21 22 23 24 25 26 27 28 29 30  Next
 
  © Copyright 1996 - 2009, The Ganoksin Project
  
Welcome to the Ganoksin Project The Gem and Jewelry World's foremost Resource on The Internet. Open to the public, Free of Charge! We are here to build a strong pool of information for the benefit of Web's jewelers and craftsmen - and those interested in jewelry and gemstones. | Site Map | Jewelry Making Articles | Orchid Forums & Archives | Members Blogs | Galleries | BenchTube - Jewelry Making Videos |
| The BenchExchange | MetalCalc | Industry Web Sites Guide | Featured Products | Advertising | Contact Us | Link to Us | RSS feeds| More...